|
Справка | Весь чат | Пользователи | Календарь | Поиск | Сообщения за день | Все разделы прочитаны |
Болталка Разговоры на разные темы |
|
Опции темы | Поиск в этой теме | Опции просмотра |
|
30.11.2022, 08:54 | #1 |
Slayer
Регистрация: 30.11.2022
Сообщений: 25
|
The Categories Of Marine Anchor
The factors that should be considered for choosing the marine anchor include easy operation, convenience to store and economic application. The most important factor is the anchor grip. The anchor grip is different because of the anchor type and the submarine soil.
There are many kinds of marine anchors. According to the different structures and uses, the ship anchor can be classified into a stocked anchor, stockless anchor, high holding power anchor and special anchor. The bow anchor adopted by the merchant ship is a stockless anchor, while the stern anchor sometimes adopts a stocked anchor or a Danforth anchor. 1. Stocked anchor The anchor has the advantages of a simple structure, large holding power to weight ratio and high grip stability, but it has inconvenient anchoring operation and storage with an anchor stock. Therefore, this anchor should not be used as a bow anchor for commercial ships, suitable as a stern anchor, generally used for small boats. 2. Stockless anchor It is also known as the hall’s anchor and the generally adopted stockless anchors for merchant ship are Hall anchor and Spek anchor. The anchor fluke and anchor rod can rotate at a certain angle and is a stockless type. The holding power to weight ratio is 2.5 to 4 and the maximum is up to 8. The anchor has a simple structure, throwing anchor operation and storage conveniently, so it is suitable for the bow anchor with the widest applications. But it also has the disadvantage of a small anchor grip. The Hall anchor is the earliest used type and the Spek anchor is an improved type of Hall anchor, which has the advantage that its anchor fluke can be naturally upward. 3.High holding power anchor It is combined with the advantages of a stocked anchor and a stockless anchor. Because of the large gnawing soil of the anchor fluke and the large gripping force, it is suitable for the sandy or soft water bottom. The commonly used HHP anchors are the Martrosov anchor and Danforth anchor which is characterized by the deep gnawing soil, high stability, with large anchor grip. But the strength of the anchor fluke is weak and easy to deform. 4.Special anchor It has different shapes, compared to the general anchors, such as single claw anchor, screw anchor and mushroom anchor. It often has special applications, used in a permanent mooring such as a floating tube, a buoy, a lightboat, the floating dock and a floating wharf. |